Carmel Dental Wax Products
All prices are subject to change without notice.
|
Carmel
Dental Baseplate & Modelling Waxes
Baseplate Waxes and Modelling Wax Sheets
|
American Continent Formulas:
All these formulas are available in packaging of 1.0 lb (454 gm) and 5.0 lb (2.268 kg).
Sheet dimensions: 6” (15.24 cm) x 3” (7.62 cm).
European Formulas:
All these formulas are available in packaging of 1.1 lb (0.5 kg) and 5.51 lb (2.5 kg).
Sheet dimensions: 6 3/4” (17.145 cm) x 3 5/16” (8.4 cm).
|
Accu-Byte “Bite Right” Sheets
|
BP100,101 & 102 Pink & Red
|
Pink Bulldog “Premium Light Tenacious”
|
Red C / Flexi-II Red “Truform Red”
|
|
Sheet form of bite wax, with same properties as cake form.
|
Made of pure, natural beeswax with no additives.
Wax softens easily under hot water.
|
Specially formulated for use in Dentistry Technique.
|
Specially formulated to check for premature occlusion and as an articulating medium.
|
Durable, all-purpose wax that is hard but not brittle yet pliable.
Tough, pliable and sufficiently tacky to hold teeth well.
Takes polish and boils out.
|
General all purpose wax for bites, registration and impression.
|
Soft and pliable Yellow wax.
Softens quickly and flows easily.
|
Highly flexible and pliable wax.
Will withstand considerable bending without cracking or breaking.
Hold shape and provide clean boil-out.
ADA Type I Baseplate Wax
|
Easily softened and cooled to minimize shrinkage.
Soft modeling.
Extra tough for easier set-ups.
|
Tenacious and flexible wax.
Not as flexible as Pink #2.
|
For warmer climates or when hardness is required.
|
For warmer climates or when extra hardness is required.
Especially designed for accurate bite registration.
It is extremely accurate and stable when used in hot water and chilled after using inter-orally.
Modeling done in hot water (60°C / 140°F), cool down fast in the mount.
|
All season and all purpose wax.
|
|
|
|
Easy to carve. Suitable for a variety of situations.
|
Used by the technician to create the preliminary denture base for the dentist to try in the patient's mouth.
Good handling properties and makes tooth setting easier and faster.
Low warpage and shrinkage giving it stability at try-in, and better fit.
ADA Type I Baseplate Wax
|
High Quality baseplate, made of microwax and paraffin.
High plasticity, will not shrink while cooling, will not deform in the mouth.
High melting point of 64°C.
|
For warmer climates or when hardness is required.
|
|
Also available:
Base plate set up sheet wax modelling modeling setup baseplate wax all season all season extra tough bite truform tru form wax.
Trueform pink number #2 wax medium soft number 3 wax med soft #3 wax med tough flexitough baseplate wax universal wax red wax regular standard bull dog Pink Bull dog baseplate premium tenacious base plate wax light prem It.
Four season wax 4 season pretty pink base plate wax expert, Q, accu-bite, X-pink , 100, 101, 102 sheet and tropical wax sheets.
|
Carmel
Dental Utility Waxes
Utility Wax, Boxing Wax, Periphery Waxes, Lingual Bars, Sprue Wax, and Beading Wax
|
Utility Wax - Two profiles available:
- Round: 3/16” (4.76 mm) diameter x 11” (27.94 cm) long. 64 rods per box.
- Square: 3/16” (4.76 mm) x 11” (27.94 cm) long. 44 strips per box.
Boxing Wax - Packaged 1.0 lb (454 gm) & 5.0 lb (2.268 kg) per box.
- Regular: 11” (27.94 cm) long x 1.5” (3.81 cm) wide x .0625” (1.6 mm) thick.
- Extra Thin: 11” (27.94 cm) long x 1.5” (3.81 cm) wide x .040” (1.0 mm) thick.
Periphery Wax - Packaged 60 rods per box. 6” (15.24 cm) 1/4” (6.4 mm) diameter.
Lingual Bar - Packaged 1.0 lb (454 gm) per box.
Sprue Wax - Round rod that is 6” (15.24 cm) long.
Diameters:
- 06 (0.162”, 4.1 mm) gauge.
- 08 (0.128”, 3.3 mm) gauge.
- 10 (0.102”, 2.6 mm) gauge and 1/4” (6.4 mm).
Packaged 1.0 lb (454 gm) per box.
Beading Wax - Packaged 5.0 lb (2.268 kg) per box.
|
|
|
Soft wax used to bead round the edge of a functional impressions to preserve the peripheral roll prior to casting.
|
Designed for boxing impressions prior to pouring the model.
Wax assists in creating interesting pattern configurations.
Melts at 80°C / 176°F.
Available in regular (0.097 in.) and thin (0.040).
|
Used for border molding.
Specially formulated for hydrocolloid impressions.
Tacky but not greasy.
Adheres easily to trays.
|
Soft and pliable.
Tacky at room temperature but not greasy.
Once applied, it will adhere without heat.
It is used for build-up (border molding) as well as extending of impression trays and post-damming.
It is also used for beading impressions to preserve the peripheral roll and for filling sprue bases and mending patterns.
|
Fully refined to remove impurities, the wax sprue rods burn-out quickly without residue.
Perfect for building even the most demanding sprue systems.
The wax has flexibility and sufficient rigidity for sprueing and mounting a wax pattern.
Specially formulated (173ºF / 78ºC melting temp) not just to hold patterns during the investing process but also for easy elimination during burnout.
|
Speciality Product for unique technique.
|
|
Carmel
Dental Bite Rims
Bite Blocks, Bite Rims, Occlusal Rims, and Bite Sticks
|
Bite Blocks - Packaged 120 units per box.
Occlusal Rims - Packaged 100 units per box.
Bite Rims - Packaged 100 units per box.
Bite Sticks - 2 lenghts available: 9” (225 mm) or 4 1/2” (115 mm), width and thickness 3/8” (10 mm).
Available in soft, medium and hard.
Packaged 4.0 lb (1.85 kg) per box.
Available in pink and yellow.
|
|
|
Recessed base aids adaptation to base plate.
Can be reshaped at room temperature to fit individual arch.
U-shaped, pink.
|
Time-saving regular occlusal rims for the dentist or technician.
The pre-shaped curved blocks have a specially curved base to fit the model.
The blocks can be easily adapted to shape and carved with a wax knife.
Prevents the risk of porosity which may occur when sheets of wax are hand-rolled.
The blocks are designed to represent the tooth position and are quick to use.
|
Recessed base aids adaptation to base plate.
Can be reshaped at room temperature to fit individual arch.
|
Time-saving hard occlusal rims for the dentist or technician.
The pre-shaped curved blocks have a specially curved base to fit the model.
The blocks can be easily adapted to shape and carved with a wax knife.
Prevents the risk of porosity which may occur when sheets of wax are hand-rolled.
The blocks are designed to represent the tooth position and are quick to use.
|
|
Carmel
Dental Bite & Impression Wax
Bite Wafers, Orthopedic Wax Bites, and Bite Registration Wax
|
Bite Waffers - Single sheet of soft wax in U form.
Packaged 50 units per box.
Laminated Bite Wafers - 2 sheets of bite wax stabilized by a thin layer of foil.
Packaged 36 or 84 units per box.
Ortho-Wax Bites - Packaged 28 units per box.
Bite Registration Wax - Packaged in 2 forms:
- Sheets: 1.0 lb (454 gm), dimensions: 6” (15.24 cm) x 3” (7.62 cm).
- Wafers: packaged 25 per box.
|
Orthopedic Wax Bite “Butterfly”
|
|
Economical bite registration wax.
|
U-shaped and designed for a fast precise retain of the situation.
|
U-shaped wax wafers with a foil laminated center.
Used for checking occlusal relationships.
Thin foil layer prevents teeth from biting through.
Copper particles provide uniform flow of heat and soften quickly.
Sets hard when chilled.
|
Product is dimensionally stable, will not shrink or distort as it cools and are ideal for checking and maintaining accurate occlusal records.
Bite sheets heat to "dead soft" when warmed (58°C / 135°F).
The sheets conform to the mouth to every detail and set by water or room temperature.
Will not deflect the mandible.
|
Used to take accurate wax bite.
|
|
Orthopedic wax bites - custom formulated to make appropriate teeth registration for construction of orthopedic appliances.
Also Available:
check bite hard wafers, copper soft wafer
|
Carmel
Dental Crown & Bridge Waxes
Presentation Wax, Chrome Cobalt Wax, Sculpturing Wax, Modelling Wax, and Margin Wax
|
Presentation Wax - Packaged in 2.0 oz (56.7 gm).
Modelling Wax - Tins: 2.0 oz (56.7 gm) per tin.
Chrome Cobalt Wax - Tins: 1.0 1b (454 gm) per tin.
Sculpturing Wax - Tins: 2.469 oz (70 gm) per tin.
Margin Wax - Tins: 2.0 oz (56.7 gm) per tin.
|
Margin, Sculpturing & Presentation Waxes
|
Margin Wax
“Cervical Wax”
|
Sculpturing Wax
“Crown & Bridge Wax”
“Carving Wax”
|
|
Used to seal margins of copings, crowns, inlays and onlays.
This wax has a degree of fluidity that will allow it to flow and fit perfectly in cervical areas, with just the right elasticity and flexibility to produce sharp clean and accurate margins.
It is semi transparent, non-gummy, has a medium hardness, and high adaptation and stability to surfaces.
It will wet model surface without shrinkage and with minimal contraction or lifting.
Produce easily-visible margin edges, accurately draws off over imperfections in the die, and precisely defines the anatomy in the metal restorations.
|
Used for sculpturing inlays, onlays, full crowns, ceramic frameworks, implants and partial denture patterns.
Can be involved in crown preparations and direct wax-up of resin bonded bridges.
The wax as a high viscosity so it won’t run when molten.
That viscosity enable it to be used in the build up of a wax mass or the forming of edge mouldings.
It sets to medium hardness and has excellent carvability without being brittle or gummy.
It has a flexible memory and is a very malleable wax that can retain it's shape and will have a low-shrinkage (small contraction).
|
A white, enamel-like wax used to makes a more aesthetic case presentation (wax-up).
Easy carving properties.
Also aids in the fabrication of temporaries.
|
|
Euro Set Up Wax (3 hardness)
Similar to Pink #2
|
|
A wax that is specifically formulated for arranging and articulating artificial teeth by providing a firm attachment of the artificial teeth to the base plate.
The wax is quite hard at room temperatures, but when it is softened, it become very tough, slightly tacky, and it allows considerable elongation.
This permits tooth placement without wax fracture.
The carves easily and boils-out cleanly.
While tooth arrangement is the primary indication, Set-Up Wax can also find other use in the lab.
|
Used in the construction of the wax rim in which the artificial teeth and molars are placed in the process of preparing a prosthesis.
Wax is tenacious, will not break easily and have exceptionally good handling properties.
Can be modelled to a desired shape while warmed and upon cooling, it will retain it's shape with great dimensional stability and excellent adhesiveness to the other dental materials involved.
|
|
Also Available:
Chrome cobalt margin inlay sticky wire spool dipping sprue wax
|
Carmel
Dental Crown & Bridge Waxes
Inlay Wax, Sticky Wax, Wire Wax, and Dipping Wax
|
Inlay Wax -
- Tins: 2.0 oz (56 gm) per tin.
- Chunks: 1.0 lb (454 gm) per box.
- Sticks: 12, 24, or 120 per box.
Sticky Wax -
- Chunks: 1.0 lb (454 gm) per box.
- Sticks: 12, 24, or 120 per box.
Wire Wax - Wax wire wound on spools containing 0.5 lb (227 gm) or 8.8 oz (250 gm).
Available in different hardnesses in blue, natural, green, turquoise and white.
Dipping Wax - Packaged in 9.0 oz (255 gm) and 18.0 oz (510 gm).
|
Inlay Wax Chunks, Sticks & Tin
|
|
Used to make coping for inlay and onlay pattern by covering dies with a base coat of wax.
The die is dipped once into liquefied wax to produce a perfectly adapted, detailed, reproducible and accurate copings of wax that has an even wall thickness with sealed margins.
The coping allows virtually immediate and easy carving.
The crush resistant copings come off the dies clean while supporting flexible and sharp margins.
The wax has high elasticity (memory), burnout clean and has minimum shrinkage (consistent dimensional integrity).
The wax has also excellent scraping and cutting qualities, as it can be carved & shaped and will resist warping, breaking or deforming of the copings, giving it best fittings and easy adaption of the casted crowns.
|
Waxes developed for the requirements of inlay technique.
The wax is form-stable and contraction resistant (low shrinkage) from wax-up to burnout.
It will not to pull, flare, chip, crack, drag or expand at the margins even when being cast in extremely thin sections.
It will resists deformation due to handling and can be easily carved.
Will not become sticky or flaky or gum up instruments and will burn-out cleanly with no residue.
|
|
Sticky, Spool “Wire” & Waxes
|
|
The wax is also known as “model cement” and is used to hold or weld material or pieces together.
It can also be used to sprue connect or repairs wax patterns.
The wax is melted with a gas flame and used as a wax “glue”.
To remove the wax, just reheat it and it will melts cleanly away without residue.
The wax is highly tenacious (strong), hard, fast-setting and very adhesive.
It flows easily, sets firmly, and is rigid at room temperature.
|
The product is a pliable blue wax wire wound on spools.
Spools have center hole so that they can be placed on a round dowel and unwound as needed.
These waxes can easily be handled, shaped, formed and worked together with a heated spatula.
Different sizes and shapes can be joined together to develop a model.
This high quality, pliable wax is ideal for producing lingual bars and retentions.
While extremely flexible, this wax is strong enough to be twisted or bent to conform to any shape without cracking or breaking.
Different stock shapes are available with gauges ranging from 6 through 20.
The wax wire on rolls is very economical in terms of consumption, because only the amount actually required needs to be cut, thus providing excellent value for money.
|
|
Carmel
Dental Braces Wax
Relief Wax, Orthodontic Wax, and Patient Wax
|
Relief Wax (Transparent Box) - Place on braces to guard against irritation.
Packaged 50 or 100 units per box.
Available with Plain or Mint Wax.
Relief Wax (Scented Coloured Box) - Place on braces to guard against irritation.
Packaged 50 or 100 units per box.
Relief wax (Opaque Box) - Place on braces to guard against irritation.
Packaged 50 or 100 units per box.
Sometimes new braces can be irritating to the mouth, especially when the patient is eating.
A small amount of relief wax makes an excellent buffer between metal and mouth.
Simply pinch off a small piece and roll it into a ball the size of a small pea.
Flatten the ball and place it completely over the area of the braces causing irritation.
When appliance is irritating soft tissue, patient can apply wax for rapid relief from irritation.
Select from:
- Regular or Scented case.
- Regular or Flavored Wax.
Also available:
Orthodontic waxes in various flavours and colours. Patient waxes, braces wax.
|
Legal Notice:
Images and text are copyright, registered trademark, and property of:
Carmel Industries, Ltd.
All trademarks contained in this site are the property of their respective owners.
Authors for any and all clipart, publications, video clips, animations or other viewing offerings have been acknowledged where information was provided.
Any false, incorrect, or non-acknowledgement is purely unintentional and not meant to deviate from proper authoring or rights to ownership.
Copyright © 2000 - 2011 ROSHOLT INTERNATIONAL. All Rights Reserved.
|
|
